Hakkavélin Wiki
Register
Advertisement

Kitchen Projects[]

Slime![]

We need more slime! http://www.instructables.com/id/Slime-1/

Pop Rocks[]

http://www.instructables.com/id/Pop-Rocks/

Homebrew Piezo[]

http://blog.makezine.com/archive/2011/03/collins-lab-homebrew-piezo.html

Arduino Projects[]

Arduino high speed photography trigger[]

http://blog.makezine.com/archive/2010/11/how-to_arduino_high_speed_photograp.html

Requirements:

  • SLR Camera or a camera with full manual mode
  • External flash and optional interconnects and cable
  • Arduino
  • An opto isolator chip
  • A sensor (piezo element)
  • Breadboard, hookup wires and resistors.

Pocket Laser Engraver[]

http://www.instructables.com/id/Pocket-laser-engraver/

  • Arduino - this is the heart of the control electronics.
  • Easydrive - stepper driver.
  • Two DVD-rom drivers - Maybe more if you’re unlucky, and at least one DVD-R to salvage the laser from.
  • Laser housing - singles can be found on e-bay.
  • Laser driver - There are lots of alternatives here, I use a simple LM317 based circuit.
  • Various nuts, bolts and other building materials.

Photography Projects[]

Stroboscope[]

http://makeprojects.com/Project/Stroboscope/313/1

Requirements:

  • Cork from a wine or champagne bottle
  • Battery holder, AA with battery
  • Motor, small, 1.5V–3V DC
  • Alligator test leads (2)
  • Foam sheet, 2mm×9"×12" aka “Foamies,”
  • Tool-holder spring clip, with mounting screw. You can also use a zip tie.
  • Zip tie
  • Digital SLR camera with manual focus that can take long exposures
  • Plywood, ½" thick, 10"×10"
  • Lumber (2), 2×4 , 10" lengths
  • Wood screws (4), 1¼"
  • Fabric, black enough to work as a backdrop
  • Clamp lights (2 or more)
  • Velcro tape, 3½" strips
  • Construction paper, black or cardstock
  • Cardboard box, approximately 12" square

Tools:

  • Compass, drawing
  • Drill, with drill bits
  • Hot glue gun
  • Pencil
  • Phillips screwdriver
  • Ruler or calipers
  • Scissors
  • Sewing needle, large
  • X-Acto knife

Touchwall[]

Optical multitouch surface

Requirements[]

  • An infrared camera
  • Projector
  • Heat-emitting fingers (for testing)
  • Computer

Art Projects[]

Facadeprinter[]

http://www.facadeprinter.org/en/machine.php

Requirements: Exacts are unknown, but at least

  • Paintball gun
  • Servos
  • Controller (Arduino)
  • Construct (Plywood?)

T-Shirt paint and stencils[]

Laser cut stencils

Paint:

http://www.orange-elephant.is/vorur_fatamalning.htm

http://www.isey.is/index.php?page=shop.browse&category_id=388&option=com_virtuemart&Itemid=41

Wifi Projects[]

Open Wireless Movement: https://www.eff.org/deeplinks/2011/04/open-wireless-movement


Pie In The Sky[]

Laser cutter

Advertisement